Characteristics
Wet Dry Filter Installation Instructions
Remove old filter and
clean sealing surface on lid. Carefully slide opening of filter over cage.
Push bottom of filter firmly down until it seats on the filter post. Place
enclosed rubber washer on the threaded post. Secure filter in place with
existing filter nut. Do not over tighten. Do not use filter plate supplied
with vac.
NOTICE
Important: For liquid pick-up, do not fill above inlet
or spillage will occur.
Warning: DO NOT vacuum oily or hazardous materials
such as asbestos, lead, pesticides or other health endangering materials.
DO NOT vacuum burning objects, embers or warm fireplace debris.
Warning: Remove plug from outlet before removing the
tank cover.
About Gore
CleanStream® Wet/Dry Filters
|
