About Wet Dry Vacuum Filters

This model is being discontinued.
Buy now and save 20% - Supplies are limited!

CleanStream® Filter No.09088 (3313209088)

Replacement Filter for:

• Replaces Sears® Filter 9-17884 (Vacuum models 17920, 17921, 17922, 17923, 17929, 17935, and 17937)
• For Craftsman® Black Stripe wet/dry vacuums

Filter Dimensions

• Height: 7 1/2 inches
• Diameter: 7 3/8 inches
• Inner Diameter: 5 7/8 inches

Sears Craftsman Wet Dry Vac Model Numbers/ CleanStream Filter Numbers Cross-Reference

Characteristics

• HEPA: High Efficiency Particulate Air
• Filter easily cleaned by tapping - dirt falls away

Wet Dry Filter Installation Instructions

Remove old filter and clean sealing surface on lid. Carefully slide opening of filter over cage. Push bottom of filter firmly until gasket seats against ribs on vac lid. Reinstall original filter retainer and tighten. The filter fits tightly on vac to provide a good seal.

CleanStream® Filter No. 09088

CleanStream® Filter No. 09088 (view 2)

NOTICE Important: For liquid pick-up, do not fill above inlet or spillage will occur. Warning: DO NOT vacuum oily or hazardous materials such as asbestos, lead, pesticides or other health endangering materials. DO NOT vacuum burning objects, embers or warm fireplace debris. Warning: Remove plug from outlet before removing the tank cover.   Wet/Dry Filter Cleaning Instructions Clean installed filters by gently tapping outside of dust drum. Thorough cleaning requires removal of filter. In a well-ventilated area, tap metal end cap against a hard surface to remove debris. Wash remaining debris from pleats with running water. Completely dry filter after washing.   About Gore CleanStream® Wet/Dry Filters